- Place of Origin: Guangdong, China (Mainland)
- Brand Name: BESTER
- Model Number: BS037
- Usage: Infrared motion sensor
- Theory: Infrared motion sensor
- Output: Switching Transducer
- Power Source: 220 -240V/AC
- Detection Range: 360°
- Power Frequency: 50Hz
- Ambient Light: 3-2000LUX (adjustable
- Installation Height: 2.2-4m
- Rated Load: 1200W (incandescent lamp),300W (energy-saving lamp)
- Detection Distance: 6M
- Time-Delay: min: 10sec±3sec,Max: 7min±2min
Packaging & Delivery
|Packaging Details:||each unit in a color box, 50pcs in a carton , 66x39x27cm ,G.W/N.W:8/11.7kgs|
|Delivery Detail:||5 working days|
High quality occupancy sensors,applications of infrared radiation,BS037 motion sensing
Welcome to use BS037 infrared motion sensor!
The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night; its installation is very convenient and its using is very wide. It has functions of power indication and the detection indication.
|Power Source||220 -240V/AC|
|Ambient Light||3-2000LUX (adjustable)|
|Time-Delay||min: 10sec±3sec Max: 7min±2min|
|Power Consumption||0.45W (work) 0.1W (static)|
|Rated Load||1200W (incandescent lamp) 300W (energy-saving lamp)|
|Detection Motion Speed||0.6 ~1.5m/s|
|Detection Distance||6m max (24)|
- Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the ?sun? position (max). It can work in the ambient light less than 3LUX when it is adjusted on the ?moon? position (min). As for the adjustment pattern, please refer to the testing pattern.
- Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
- Time?Delay is adjustable. It can be set according to the consumer?s desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.
INSTALLATION: (see the figure)
- Switch off the power.
- Turn clockwise the bottom-stand and take off it. The power wire cross the hole in the middle of bottom-stand.
- The bottom-stand is fixed on the selected position with inflated screw.
- Connect the power and the load into the connection-wire column of the sensor according to connection-wire diagram.
- The sensor aimed at the mouth of bottom-stand and turned anti-clockwise.
(See the right figure)
- Turn the TIME knob to minimum (-) position with anti-clockwise. Turn the LUX knob to SUN position with anti-clockwise.
- Switch on the power; the controlled load and indication lamp both are not working. Preheat 30 sec later, the load and indication lamp should be turned on synchronization. In the absence of no inductor signals, the load should be stopped working within 5-30sec, the indicator lamp is turned off.
- After the first sense is finished, and it will sense again after 5~10sec. The load should work. When there is no inductor signals in the indicator lamp, the load should be stopped working within 5-15sec.
- Turn LUX knob clockwise on the minimum (MOON position). If it is adjusted in the less than 3LUX, the inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5-15sec.
Note: when testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!
- Electrician or experienced human can install it.
- The unrest objects can?t be regarded the installation basis-face.
- In front of the detection window there aren?t hinder or unrest objects effecting detection.
- Avoid installing it near air temperature alteration zones for example: air condition, central heating, etc.
- Please don?t open the case for your safety if you find the hitch after installation.
- If there are some difference between instruction and the function the product has, please give priority to product and sorry not to inform you additionally.
SOME PROBLEM AND SOLVED WAY:
The load don?t work:
a. Check the power and the load.
b. Whether the indicator light is turned on after sensing? If yes, please check load.
c. If the indicator light does not turn on after sensing, please check if the working light corresponds to the ambient light.
d. Please check if the working voltage corresponds to the power source.
The sensitivity is poor:
a. Please check if in front of the detection window there are hinder that effect to receive the signals.
b. Please check the ambient temperature.
c. Please check if the signals source is in the detection fields.
d. Please check the installation height.
The sensor can?t shut automatically the load:
a. If there are continual signals in the detection fields.
b. If the time delay is set to the longest.
c. If the power correspond to the instruction.
d. If the air temperature change near the sensor, air condition or central heating etc.
Bester Energy Saving Technology Ltd has been committed to the LED lighting application products development, production, sales and engineering design since 2007. The company is located in the shenzhen special economic zone of China, a borders inland, near Hong Kong, Macao, Taiwan and overseas. Geographical position advantageous.
In scientific research, companies invest a lot of resources in product research and development, with a group of professional technology R&D personnel. There are many experienced engineers and production expert, and it can guarantee the quality of the products.
With regard to products, our products catalog Bester services over 40 countries worldwide and attributes its steady growth to working closely with its customer, offering good quality products, best price and technical sevice. Additionally, Bester focusing on building long-term relationships with its venders.
Our company always uphold the "excellent quality, win-win" business mode, comprehensive high quality management, can satisfy the needs of customers. In the new century, filled with new opportunities and challenges, the hope can already confidently with the new old customer, join in, "win-win" basis, create beautiful tomorrow.
Q1. Are you a manufacturer or a trading company?
- We are a manufacturer, providing OEM & ODM service.
Q2.what' is the MOQ for order?
- 50-100PCS is available, some items are in stock and trial order is accepted.
Q3.Does it have light sensor?
- Yes, you can adjuest it by yourself.
Q4:Does the delay time can be adjusted?
- it can adjust from 10s -7minutes(even more we can customize it).
- Some items are in stock, the delivery time is 1-2 workdays.
- 1-2 workdays for sample, 15-20 workdays for mass production,depends on quantity.
For more information,I will be happy to help you online.~Cherry