- Place of Origin: Guangdong, China (Mainland)
- Brand Name: BESTER
- Model Number: BS017
- Usage: Ray Sensor
- Theory: Current Sensor
- Output: Switching Transducer
- Operating voltage: 180VAC~250VAC 60Hz
- Power consumption: 0.02W
- Load power: 3~200W
- Brightness sensitivity: 10Lux±20%, 10Lux~500Lux±20%(optional)
- Delay time: 30s±20%, 5s~300s±20% (optional)
- Induction distance: 5~8m
- Induction angle: about 115 °
- Size: 86*86*30mm
- theory: intelligent sensor switch
Packaging & Delivery
|Delivery Detail:||3~10 days after payment received|
Home LED light PIR Infrared Motion Sensor Switch Human Body Induction Save Energy Motion Automatic Module Light Sensing Switch
The PIR Sensor Switch detects PIR body heat and automatically switches the light ON and turns it OFF again after a time adjustable from 6 seconds to 12 minutes. PIR sensor switch combines intelligent control and energy saving, which is widely used in aisles, basements, restrooms, etc. Help to save 20%~80% of your energy.
1. Ceiling mounted item, good appearance, it’s easy for installing, low power consumption, internal without batteries.
2. The switch suitable for various types of load (all kind of Incandescent lamp, energy saving lamps, fluorescent lamps LED fluorescent lamp), load power≤200W.
3. Adopted specific integrated circuit, stable work, strong anti-interference capability.
4. Reliable quality, switch life can reach more than 2 million times.
1. Operating voltage: 220VAC
2. Power consumption:<0.02W
3. Load power: 3~200W
4. Brightness sensitivity: 10Lux±20%, 10Lux~500Lux±20% (optional)
5. Delay time: 30s±20%, 5s~300s±30% (optional)
6. Induction distance: 5~8m.
7. Induction angle: about 115 °
8. Diameter: 86mm*86mm*30mm
More information,pls do not hesitate to contact me, I will quote you the best price.~ Cherry(Skype: bestertech06)
1. Installation strictly follow product wiring diagram, do not short circuit.
2. Recommend one switch control one load, when the load is too large or to small, please consult manufacturers.
3.Keep distance between switch and load more than 0.3 meter, do not expose to direct sun light or lighting ,don’t put it in rapid environmental changes(e.g.: big wind).
4. Don’t conduct the hot line job, please electrify only after sensor switch has been installed.
5. The switches have starting time after connecting the electricity. About 1-2 minutes later it will work normally. If normally used, switches will always connect the electricity, so no need to worry about this.
6. The infrared switches are based on the detect of the difference between the human body temperature and the environment temperature .The sensitivity will be affected by many factors such as the environment temperature, the walk speed and direction (The induction distance is about 3~5 meters as the environment temperate higher in summer, and about 5~7M in winter as the environment temperate lower in winter, that is normal).
7. The switches use the unit doublet probes, when people walk from left to right or from right to left, the sensor will be sensitive. But when people walk from the front or from top to down or even from bottom to top, the sensor will be insensitive or does not work. To meet the shortfall, the induction field has been increased, the switches have used the circular lens, so that all the four sides of the probe will besensitive, but the right-left direction is still more sensitive than the up-down direction, therefore, when install the switch, should make the right-left direction to be parallel with the direction of human movement as far as possible.